VU LIVE
📢 Browse Moaaz, Waqar Siddhu, Arslan & Tariq Papers — CS, MTH, ENG, MGT and more — Free study resources
All Pages Linked

CHE201 — Physical Chemistry | VU Solved MCQs

Virtual Ustaad Verified VU Resource Report a wrong answer
CHE201 Physical Chemistry — VU solved MCQs

CHE201 Physical Chemistry covers First law of thermodynamics, Enthalpy; state functions, Gibbs free energy, Helmholtz free energy, Second law; entropy, Gas laws; ideal gas, Molecular polarity, Properties of water, Heat capacities, Reversible and irreversible processes, Chemical kinetics; Arrhenius equation, Catalysis, Solutions; gas solubility, Phase equilibria; distillation. This solved post gives you 30 verified items for Virtual University of Pakistan, 10 Midterm MCQs from Lectures 1-22, 10 Finalterm MCQs from Lectures 23-45, and 5 Midterm plus 5 Finalterm subjective questions, each with its correct answer and handout reference. Practice every question instantly in the quiz for this course. Take the CHE201 quiz

1. Midterm Solved MCQs

Q1. The first law of thermodynamics states that:
A) The entropy of the universe always increases
B) The internal energy of an isolated system is constant; energy can neither be created nor destroyed (ΔU = q + w)
C) The Gibbs energy of a spontaneous process always increases
D) Heat always flows from cold to hot
Correct answer: B — The internal energy of an isolated system is constant; energy can neither be created nor destroyed (ΔU = q + w)
Reference: VU handout — First law of thermodynamics.
Status: Verified

Q2. Enthalpy (H) is defined as:
A) H = U − TS
B) H = U + pV
C) H = G + TS
D) H = q − w
Correct answer: B — H = U + pV
Reference: VU handout — Enthalpy; state functions.
Status: Verified

Q3. For a process at constant temperature and pressure, the criterion of spontaneity is:
A) ΔG > 0
B) ΔG = 0 for all processes
C) ΔG < 0
D) ΔH > 0
Correct answer: C — ΔG < 0
Reference: VU handout — Gibbs free energy.
Status: Verified

Q4. The Helmholtz free energy (A) is defined as:
A) A = U − TS
B) A = H − TS
C) A = U + pV
D) A = G − pV
Correct answer: A — A = U − TS
Reference: VU handout — Helmholtz free energy.
Status: Verified

Q5. For any spontaneous process, the entropy change of the universe is:
A) Always zero
B) Always negative
C) Always positive
D) Positive or zero
Correct answer: C — Always positive
Reference: VU handout — Second law; entropy.
Status: Verified

Q6. The ideal gas equation is:
A) PV = nRT
B) PV = nR/T
C) P/V = nRT
D) PV = RT/n
Correct answer: A — PV = nRT
Reference: VU handout — Gas laws; ideal gas.
Status: Verified

Q7. Carbon dioxide is a non-polar molecule because:
A) The C=O bonds are non-polar
B) It is linear, so the two C=O bond dipoles cancel each other and the net dipole moment is zero
C) It has no oxygen atoms
D) It is an ionic compound
Correct answer: B — It is linear, so the two C=O bond dipoles cancel each other and the net dipole moment is zero
Reference: VU handout — Molecular polarity.
Status: Verified

Q8. Ice floats on water because:
A) Ice is heavier than water
B) Water is densest at 4 °C, and on freezing water forms an open hexagonal structure that increases its volume by about 9%, making ice less dense than liquid water
C) Ice has no hydrogen bonds
D) Water contracts on freezing
Correct answer: B — Water is densest at 4 °C, and on freezing water forms an open hexagonal structure that increases its volume by about 9%, making ice less dense than liquid water
Reference: VU handout — Properties of water.
Status: Verified

Q9. For an ideal gas, the molar heat capacity at constant pressure (Cp) is related to that at constant volume (Cv) by:
A) Cp = Cv
B) Cp = Cv + R
C) Cp = Cv − R
D) Cp = Cv × R
Correct answer: B — Cp = Cv + R
Reference: VU handout — Heat capacities.
Status: Verified

Q10. Which of the following is an example of a nearly reversible process?
A) Free expansion of a gas into a vacuum
B) Frictionless adiabatic expansion or compression of a fluid
C) Combustion of petrol
D) Mixing of two different gases
Correct answer: B — Frictionless adiabatic expansion or compression of a fluid
Reference: VU handout — Reversible and irreversible processes.
Status: Verified

2. Finalterm Solved MCQs

Q1. The Arrhenius equation, which describes how the rate constant varies with temperature, is:
A) k = A e^(Ea/RT)
B) k = A e^(−Ea/RT)
C) k = A + Ea/RT
D) k = A ln(Ea/RT)
Correct answer: B — k = A e^(−Ea/RT)
Reference: VU handout — Chemical kinetics; Arrhenius equation.
Status: Verified

Q2. A catalyst increases the rate of a reaction by:
A) Increasing the activation energy
B) Providing an alternative pathway with a lower activation energy
C) Shifting the position of equilibrium
D) Increasing the temperature of the reaction
Correct answer: B — Providing an alternative pathway with a lower activation energy
Reference: VU handout — Catalysis.
Status: Verified

Q3. Henry's law states that, at constant temperature, the solubility of a gas in a liquid is:
A) Inversely proportional to its partial pressure
B) Directly proportional to its partial pressure (C = kP)
C) Independent of pressure
D) Proportional to the square of its partial pressure
Correct answer: B — Directly proportional to its partial pressure (C = kP)
Reference: VU handout — Solutions; gas solubility.
Status: Verified

Q4. An azeotrope is a mixture that:
A) Boils at the temperature of its more volatile component
B) Has the same composition in the vapour phase and the liquid phase, so it cannot be separated by simple distillation
C) Contains only one component
D) Freezes at a constant temperature
Correct answer: B — Has the same composition in the vapour phase and the liquid phase, so it cannot be separated by simple distillation
Reference: VU handout — Phase equilibria; distillation.
Status: Verified

Q5. According to Le Chatelier's principle, if the pressure of a gaseous equilibrium system is increased, the equilibrium shifts:
A) Towards the side with more moles of gas
B) Towards the side with fewer moles of gas
C) It does not shift
D) Towards the exothermic direction always
Correct answer: B — Towards the side with fewer moles of gas
Reference: VU handout — Chemical equilibrium; Le Chatelier's principle.
Status: Verified

Q6. Mass percent of a solution is calculated as:
A) (Mass of solute ÷ mass of solution) × 100
B) (Volume of solute ÷ volume of solution) × 100
C) (Moles of solute ÷ litres of solution) × 100
D) (Mass of solvent ÷ mass of solution) × 100
Correct answer: A — (Mass of solute ÷ mass of solution) × 100
Reference: VU handout — Concentration units.
Status: Verified

Q7. The stopped-flow method is used to study:
A) Very slow reactions over days
B) Fast reactions in solution, over time intervals down to a fraction of a millisecond
C) Gas-phase reactions only
D) Reactions at equilibrium only
Correct answer: B — Fast reactions in solution, over time intervals down to a fraction of a millisecond
Reference: VU handout — Fast-reaction techniques.
Status: Verified

Q8. An enzyme, as a biological catalyst, affects a reaction by:
A) Raising the activation energy and shifting the equilibrium
B) Lowering the activation energy and increasing the rate of both the forward and reverse reactions, without changing the equilibrium
C) Being consumed in the reaction
D) Changing the free energy of the products
Correct answer: B — Lowering the activation energy and increasing the rate of both the forward and reverse reactions, without changing the equilibrium
Reference: VU handout — Enzyme catalysis.
Status: Verified

Q9. In a Maxwell distribution of molecular speeds, when the temperature is increased the peak of the distribution:
A) Shifts to lower speed and becomes taller
B) Shifts to higher speed (to the right) and becomes broader and lower
C) Does not move
D) Disappears
Correct answer: B — Shifts to higher speed (to the right) and becomes broader and lower
Reference: VU handout — Kinetic theory of gases; Maxwell distribution.
Status: Verified

Q10. Which of the following factors increases the rate of a chemical reaction?
A) Decreasing the temperature
B) Increasing the reactant concentration and the temperature, and increasing the surface area of a solid reactant
C) Decreasing the surface area of the reactants
D) Removing the catalyst
Correct answer: B — Increasing the reactant concentration and the temperature, and increasing the surface area of a solid reactant
Reference: VU handout — Factors affecting reaction rate.
Status: Verified

3. Midterm Subjective

Q1. State the first law of thermodynamics and explain the terms internal energy and enthalpy.
Answer: The first law states that the internal energy (U) of an isolated system is constant: energy can neither be created nor destroyed, only converted from one form to another. Mathematically ΔU = q + w, where q is the heat supplied to the system and w is the work done on the system. Internal energy is the total energy of the system — the kinetic energy of the molecules plus the potential energy of their interactions; it is a state function, so ΔU depends only on the initial and final states. Enthalpy is defined as H = U + pV. It is also a state function, and at constant pressure the heat absorbed by the system equals the change in enthalpy (qₚ = ΔH), which is why most chemical reactions are discussed in terms of ΔH rather than ΔU.
Reference: VU handout — First law; internal energy; enthalpy.
Status: Verified

Q2. Define the Gibbs and Helmholtz free energies and give the fundamental equations of thermodynamics for closed systems.
Answer: With the internal energy U and the enthalpy H = U + pV, we introduce two more state functions: the Helmholtz free energy A = U − TS and the Gibbs free energy G = H − TS = U + pV − TS. For a closed system the fundamental equations are: dU = TdS − pdV (U as a function of S and V); dH = TdS + Vdp (H as a function of S and p); dA = −SdT − pdV (A as a function of T and V); and dG = −SdT + Vdp (G as a function of T and p). From these come the Maxwell relations and the fact that all thermodynamic functions can be obtained from G(T, p). The practical importance: at constant T and V a process is spontaneous if ΔA < 0; at constant T and p it is spontaneous if ΔG < 0 — so G is the natural criterion for chemistry, which is usually done at constant temperature and pressure.
Reference: VU handout — Gibbs free energy.
Status: Verified

Q3. What is chemical potential? How do the fundamental equations change for an open (multicomponent) system?
Answer: The fundamental equations above are for closed systems of fixed composition. If the composition can change — as in a chemical reaction or a biochemical process — we need the chemical potential. For a two-component system the Gibbs energy is G(T, p, n₁, n₂), and the chemical potential of species i is defined as μᵢ ≡ (∂G/∂nᵢ)T,p,nⱼ — the change in Gibbs energy when a small amount of species i is added at constant T and p. The fundamental equations then gain a term for each component: dU = TdS − pdV + Σ μᵢdnᵢ, dH = TdS + Vdp + Σ μᵢdnᵢ, dA = −SdT − pdV + Σ μᵢdnᵢ, and dG = −SdT + Vdp + Σ μᵢdnᵢ. At equilibrium the chemical potential of a species is the same everywhere in the system — a substance flows from high to low chemical potential, just as heat flows from high to low temperature.
Reference: VU handout — Multicomponent systems; chemical potential.
Status: Verified

Q4. How does ice float on water?
Answer: Water is one of the few substances whose solid floats on its liquid. As liquid water cools it becomes denser, but only until 4 °C, its temperature of maximum density. Below 4 °C it becomes less dense. When freezing, the molecules move more slowly and form hydrogen bonds more easily, arranging themselves into an open, crystalline, hexagonal structure in which the molecules are held further apart than in the liquid. Because of this open structure the volume increases by about 9% on freezing, so ice is less dense than liquid water and floats. Floating ice insulates the water below it, which is why lakes freeze from the top down and aquatic life survives under the ice in winter.
Reference: VU handout — Properties of water.
Status: Verified

Q5. What are the limitations of thermodynamics?
Answer: Thermodynamics is powerful but has clear limits: (1) It only points the way — it says whether a process can occur spontaneously (ΔG < 0) but nothing about how long it will take to get there; a thermodynamically favoured reaction may be immeasurably slow (e.g. diamond turning into graphite). (2) It says nothing about the mechanism — the stoichiometric equation says nothing about the elementary steps by which the reaction proceeds; that is the subject of chemical kinetics. (3) It deals with macroscopic, equilibrium properties and cannot describe individual molecules or the rates of molecular events. (4) It gives no information about the time scale or the pathway. So thermodynamics and kinetics are complementary: thermodynamics tells us if a reaction can happen, kinetics tells us how fast and by what mechanism.
Reference: VU handout — Limitations of thermodynamics.
Status: Verified

4. Finalterm Subjective

Q1. What is a reaction mechanism? Write the elementary steps of a reaction mechanism and their types.
Answer: A mechanism for a reaction is a collection of elementary processes (elementary steps or elementary reactions) that explains how the overall reaction proceeds at the molecular level. An elementary step expresses how molecules or ions actually react with each other; its equation represents the reaction at the molecular level, not the overall reaction. By the number of molecules involved there are three kinds of elementary steps: unimolecular (one molecule reacts, e.g. A → products), bimolecular (two molecules collide, e.g. A + B → products) and termolecular (three molecules collide at once — very rare). An elementary step is proposed so that the rate expression can be written: the rate of an elementary step is always written directly from its equation (e.g. rate = k[A][B] for A + B → products), which is very different from the rate law of an overall reaction, which must be found experimentally and need not match the stoichiometry.
Reference: VU handout — Reaction mechanisms; elementary steps.
Status: Verified

Q2. Explain the stopped-flow method for studying fast reactions.
Answer: The stopped-flow method is the most common way of studying fast reactions in solution, over time intervals down to a fraction of a millisecond, by following changes in light absorption, fluorescence or other properties. The apparatus consists of two or more coupled syringes that rapidly inject the reactants into a small mixing chamber and then through an observation cell coupled to a spectrophotometer or other detector. As the solution flows through the cell it empties into a stopping syringe; when that syringe is filled it strikes a backstop and abruptly stops the flow. The volume the stopping syringe accepts is adjusted so that the mixture in the cell has just become uniform; at that point recording begins and the change in the cell is followed as the reaction proceeds. The method follows not only the concentrations of reactants and products but also the build-up and decay of intermediates. If the reaction cannot be followed optically, it can be stopped after a chosen interval by adding a quenching agent (e.g. an acid that denatures an enzyme) and the mixture analysed — the quenched-flow variant.
Reference: VU handout — Fast-reaction techniques; stopped flow.
Status: Verified

Q3. Write the methods used for the measurement of the rate of a reaction.
Answer: Any physical property that changes with the concentration of a reactant or product can be monitored to measure the rate. The main methods are: (1) Methods for measuring concentration — e.g. titration of samples taken at intervals, or chromatography; (2) Spectrophotometry — following the change in light absorption (colour) of a reactant or product; (3) Continuous flow — reactants are mixed and flowed past a detector at a known speed; (4) Stopped flow — for fast reactions, down to fractions of a millisecond; (5) Relaxation methods — a system at equilibrium is disturbed (temperature or pressure jump) and its return to equilibrium is followed; and (6) Rate vs concentration proportionalities — measuring initial rates at different concentrations to find the order. Other measurable characteristics include change in pressure (for gas reactions), change in temperature (for exothermic/endothermic reactions), change in electrical conductivity or pH, and the appearance of a key substance. The choice depends on the speed of the reaction and on which property changes conveniently.
Reference: VU handout — Measurement of reaction rates.
Status: Verified

Q4. State and explain Henry's law. Give its applications and limitations.
Answer: Henry's law, formulated by William Henry in 1803, states: at constant temperature, the amount of a given gas that dissolves in a given type and volume of liquid is directly proportional to the partial pressure of that gas in equilibrium with the liquid. In symbols C = kPgas, where C is the solubility of the gas at a fixed temperature in a particular solvent (e.g. mol/L) and k is Henry's law constant (e.g. mol/L·atm). Applications: calculating the solubility of oxygen in water and blood; the "bends" in deep-sea diving (nitrogen dissolves in blood at high pressure and bubbles out on rapid ascent); and carbonation of soft drinks (CO₂ dissolved under pressure). Limitations: it applies only at equilibrium; it fails for gases at high pressures (e.g. N₂ at high pressure becomes very soluble and harmful in the blood); and it fails if the gas reacts chemically with the solvent (e.g. HCl(g) reacts with water to give H₃O⁺ and Cl⁻).
Reference: VU handout — Solutions; Henry's law.
Status: Verified

Q5. State Le Chatelier's principle and explain its effects on a system at equilibrium.
Answer: Le Chatelier's principle states that if a system at equilibrium is disturbed by an external change, the system adjusts itself to counteract that change and re-establish a new equilibrium. Its effects are: (1) Change in concentration — adding a reactant shifts the equilibrium towards the products, and vice versa. (2) Change in pressure (gases) — increasing the pressure shifts the equilibrium towards the side with fewer moles of gas; decreasing it shifts it towards more moles. (3) Change in temperature — increasing the temperature favours the endothermic reaction (which absorbs heat); decreasing it favours the exothermic reaction. (4) Change in volume — decreasing the volume raises the pressure and shifts the equilibrium to the side with fewer moles of gas, and vice versa. (5) Catalysts — a catalyst speeds up the forward and reverse reactions equally and helps the system reach equilibrium faster, but does not change the position of equilibrium. (6) Solubility equilibria — adding a common ion decreases the solubility of a slightly soluble salt, because the system shifts to counteract the increase in ion concentration.
Reference: VU handout — Chemical equilibrium; Le Chatelier's principle.
Status: Verified

See the Solved MCQs page and the midterm and finalterm mega hubs for solved papers for every subject.

🎁

Download This Study Material

Direct Link • Free • Verified Safe File

Download File

Comments

Advertisement
Advertisement

Tool