VU LIVE
📢 Browse Moaaz, Waqar Siddhu, Arslan & Tariq Papers — CS, MTH, ENG, MGT and more — Free study resources
All Pages Linked

BT735 — Advances in Fermentation Technology | VU Solved MCQs

Virtual Ustaad Verified VU Resource Report a wrong answer
BT735 Advances in Fermentation Technology — VU solved MCQs

BT735 Advances in Fermentation Technology covers Isolation and screening of industrially important microbes, Culture collections, Screening techniques, Fermentation and micro-organisms, Media sterilization, Types of fermentation, Fed-batch culture, Oxygen transfer; KLa determination, Downstream processing; harvesting, Downstream processing; liquid–liquid extraction, Product stability; Maillard reactions, Auxotrophy and prototrophy, Solid-state and submerged fermentation, Fermenter types; airlift fermenter. This solved post gives you 30 verified items for Virtual University of Pakistan, 10 Midterm MCQs from Lectures 1-22, 10 Finalterm MCQs from Lectures 23-45, and 5 Midterm plus 5 Finalterm subjective questions, each with its correct answer and handout reference. Practice every question instantly in the quiz for this course. Take the BT735 quiz

1. Midterm Solved MCQs

Q1. Which of the following is NOT a criterion for the choice of an industrially important organism?
A) The organism must be genetically stable
B) The organism must be able to produce a high yield of product
C) The optimum temperature for the growth of the organism must be above 50 °C
D) The organism must be able to grow in an easily available nutrient medium
Correct answer: C — The optimum temperature for the growth of the organism must be above 50 °C
Reference: VU handout, Lecture 3 — Isolation and screening of industrially important microbes.
Status: Verified

Q2. The full form of ATCC is:
A) American Type Culture Collection
B) Automatic Type Counter and Classifier
C) American Type Counter Collection
D) American Type Classifier and Collection
Correct answer: A — American Type Culture Collection
Reference: VU handout, Lecture 3 — Culture collections.
Status: Verified

Q3. Which of the following methods is NOT used in the isolation and screening of desired micro-organisms?
A) Crowded plate technique
B) Auxanographic technique
C) Enrichment culture technique
D) Hanging drop technique
Correct answer: D — Hanging drop technique
Reference: VU handout, Lecture 4 — Screening techniques.
Status: Verified

Q4. Which method is useful for the isolation and detection of organisms having the ability to produce antibiotics?
A) Enrichment culture technique
B) Crowded plate technique
C) Indicator dye technique
D) Hanging drop technique
Correct answer: B — Crowded plate technique
Reference: VU handout, Lecture 4 — Screening techniques; crowded plate.
Status: Verified

Q5. The indicator dye technique is used for the detection and isolation of organisms that produce:
A) Antibiotics
B) Organic acids
C) Enzymes
D) Vitamins
Correct answer: B — Organic acids
Reference: VU handout, Lecture 4 — Screening techniques; indicator dyes.
Status: Verified

Q6. Which method is useful for the detection and isolation of organisms capable of growing on a particular nutrient medium?
A) Crowded plate technique
B) Auxanographic technique
C) Enrichment culture technique
D) Replica plating
Correct answer: C — Enrichment culture technique
Reference: VU handout, Lecture 4 — Screening techniques; enrichment culture.
Status: Verified

Q7. Screening, in industrial microbiology, is:
A) The random plating of soil samples
B) The use of highly selective procedures to allow the detection and isolation of only the micro-organisms of interest from a large population
C) The sterilization of the fermentation medium
D) The counting of colonies on a plate
Correct answer: B — The use of highly selective procedures to allow the detection and isolation of only the micro-organisms of interest from a large population
Reference: VU handout, Lecture 4 — Screening.
Status: Verified

Q8. The micro-organism primarily involved in bread fermentation is:
A) Lactobacillus species
B) Saccharomyces cerevisiae
C) Aspergillus niger
D) Acetobacter aceti
Correct answer: B — Saccharomyces cerevisiae
Reference: VU handout, Lecture 2 — Fermentation and micro-organisms.
Status: Verified

Q9. The common method used for sterilizing fermentation media is:
A) Dry heat at 160 °C for 2 hours
B) Steam sterilization (moist heat, typically 121 °C for 15–20 minutes)
C) Ultraviolet irradiation
D) Filtration through cloth
Correct answer: B — Steam sterilization (moist heat, typically 121 °C for 15–20 minutes)
Reference: VU handout, Lecture 8 — Media sterilization.
Status: Verified

Q10. What are the two common types of fermentation?
A) Aerobic and anaerobic fermentation
B) Alcohol fermentation and lactic acid fermentation
C) Batch and continuous fermentation
D) Solid-state and submerged fermentation
Correct answer: B — Alcohol fermentation and lactic acid fermentation
Reference: VU handout, Lecture 2 — Types of fermentation.
Status: Verified

2. Finalterm Solved MCQs

Q1. In fed-batch fermentation:
A) Fresh medium is fed continuously while broth is removed at the same rate
B) Nutrients are added during the fermentation without removing broth, so the volume increases
C) No nutrients are added after inoculation
D) The culture is always in stationary phase
Correct answer: B — Nutrients are added during the fermentation without removing broth, so the volume increases
Reference: VU handout, Lecture 26 — Fed-batch culture.
Status: Verified

Q2. The volumetric oxygen-transfer coefficient (KLa) in a fermenter is commonly determined by:
A) The crowded plate technique
B) The sulphite oxidation method and the gassing-out method
C) The auxanographic technique
D) Measuring the pH only
Correct answer: B — The sulphite oxidation method and the gassing-out method
Reference: VU handout, Lecture 30 — Oxygen transfer; KLa determination.
Status: Verified

Q3. What is the first step of downstream processing after fermentation is complete?
A) Chromatographic purification
B) Separation of the cells/biomass from the broth (harvesting)
C) Crystallization of the product
D) Spray drying
Correct answer: B — Separation of the cells/biomass from the broth (harvesting)
Reference: VU handout, Lecture 35 — Downstream processing; harvesting.
Status: Verified

Q4. Liquid–liquid extraction separates a product on the basis of:
A) Its molecular size only
B) Its differential solubility in two immiscible liquids
C) Its electric charge only
D) Its boiling point only
Correct answer: B — Its differential solubility in two immiscible liquids
Reference: VU handout, Lecture 37 — Downstream processing; liquid–liquid extraction.
Status: Verified

Q5. The Maillard reaction is:
A) The reaction between an enzyme and its substrate
B) The browning reaction between amino acids (or proteins) and reducing sugars on heating
C) The hydrolysis of starch by amylase
D) The oxidation of ethanol to acetic acid
Correct answer: B — The browning reaction between amino acids (or proteins) and reducing sugars on heating
Reference: VU handout, Lecture 38 — Product stability; Maillard reactions.
Status: Verified

Q6. An auxotroph differs from a prototroph in that the auxotroph:
A) Can synthesize all the growth factors it needs
B) Requires one or more growth factors from the medium because it cannot synthesize them
C) Grows only at high temperatures
D) Cannot use glucose as a carbon source
Correct answer: B — Requires one or more growth factors from the medium because it cannot synthesize them
Reference: VU handout, Lecture 33 — Auxotrophy and prototrophy.
Status: Verified

Q7. Which statement correctly distinguishes solid-state fermentation (SSF) from submerged fermentation (SmF)?
A) SSF uses a liquid broth; SmF uses a solid substrate
B) SSF uses a solid substrate with little or no free water; SmF uses micro-organisms growing in a liquid medium
C) SSF is always continuous; SmF is always batch
D) SSF needs no sterilization; SmF needs sterilization
Correct answer: B — SSF uses a solid substrate with little or no free water; SmF uses micro-organisms growing in a liquid medium
Reference: VU handout, Lecture 24 — Solid-state and submerged fermentation.
Status: Verified

Q8. An airlift fermenter differs from a stirred-tank fermenter in that:
A) It has no impeller — mixing and aeration are provided by the rising air itself
B) It cannot be used for aerobic cultures
C) It uses a higher agitator speed
D) It has no sparger
Correct answer: A — It has no impeller — mixing and aeration are provided by the rising air itself
Reference: VU handout, Lecture 29 — Fermenter types; airlift fermenter.
Status: Verified

Q9. Which is an advantage of using immobilized cells or enzymes in a fermenter?
A) They cannot be reused
B) They are easily separated from the product and can be reused in successive batches
C) They always give a lower product yield
D) They eliminate the need for sterilization
Correct answer: B — They are easily separated from the product and can be reused in successive batches
Reference: VU handout, Lecture 32 — Immobilization.
Status: Verified

Q10. Antifoaming agents in fermentation are used to:
A) Increase the oxygen transfer rate by making more foam
B) Control and break down foam, e.g. silicone oils or polypropylene glycol, so the fermenter does not overflow and gas exchange is not blocked
C) Sterilize the medium
D) Adjust the pH of the broth
Correct answer: B — Control and break down foam, e.g. silicone oils or polypropylene glycol, so the fermenter does not overflow and gas exchange is not blocked
Reference: VU handout, Lecture 31 — Foam control.
Status: Verified

3. Midterm Subjective

Q1. Explain solid-state fermentation and submerged fermentation, and compare them.
Answer: Submerged fermentation (SmF) is growth of micro-organisms in a liquid medium in a stirred-tank or airlift fermenter, with aeration by sparging and agitation; it is the standard for most industrial products (antibiotics, enzymes, ethanol, SCP) because pH, temperature, dissolved oxygen and nutrients are easily monitored and controlled, and scale-up is well understood. Solid-state fermentation (SSF) is growth on a moist solid substrate (e.g. wheat bran, rice, soya) with little or no free water, in trays, packed beds or rotating drums. Comparison: SmF gives better control of process parameters and heat removal, but needs large volumes of water and produces dilute effluent; SSF uses less water and energy, gives high product concentrations, is closer to the natural habitat of fungi, and is simpler and cheaper for some products (e.g. koji, tempeh, some enzymes), but suffers from poor heat and mass transfer, difficulty of monitoring (pH, moisture, biomass) and harder scale-up.
Reference: VU handout, Lecture 24 — Solid-state and submerged fermentation.
Status: Verified

Q2. What is strain improvement? Describe the methods used to improve an industrial strain.
Answer: Strain improvement is the deliberate enhancement of a production strain to raise product yield, increase growth rate, remove unwanted by-products, or improve tolerance to the process environment. Methods: (1) Mutation and selection — exposure to UV, X-rays or chemical mutagens (e.g. NTG), followed by screening of survivors for over-production (random but historically the most successful, e.g. penicillin yield rose ~1000-fold this way); (2) Selection of natural variants and screening of new isolates; (3) Recombinant DNA / genetic engineering — cloning and over-expression of biosynthetic genes, deletion of competing pathways, and introduction of heterologous genes; (4) Protoplast fusion — fusing protoplasts of two strains to combine desirable traits without full sexual crossing; (5) Rational metabolic engineering — redirecting metabolic fluxes on the basis of pathway knowledge; and (6) Adaptive evolution / continuous selection under process conditions. Improved strains are preserved (lyophilization, cryopreservation, ATCC-type culture collections) so the improved traits are not lost.
Reference: VU handout, Lecture 5 — Strain improvement.
Status: Verified

Q3. What is a CSTR (continuous stirred-tank bioreactor)? How does it work as a chemostat, and what is washout?
Answer: A continuous stirred-tank reactor (CSTR) is a well-mixed vessel to which sterile medium is fed continuously while culture is removed at the same rate, keeping the volume constant. Used for continuous culture it is called a chemostat: the growth rate is controlled by the supply of the limiting nutrient. At steady state the specific growth rate equals the dilution rate, μ = D, where D = F/V (flow rate / vessel volume), and the biomass and residual substrate concentrations stay constant, so the culture can be held in exponential growth indefinitely. This lets the Monod constants μmax and Ks be measured (plot 1/μ against 1/S, as in a Lineweaver–Burk plot). If the dilution rate is raised above the maximum specific growth rate (D > μmax), cells are washed out faster than they can divide, the biomass falls to zero and the culture is lost — this is washout; the critical dilution rate is Dc ≈ μmax. The main drawback of the chemostat is the continuous loss of cell mass in the outflow, which can be reduced by cell recycling or immobilization.
Reference: VU handout, Lecture 10 — Continuous culture; CSTR and chemostat.
Status: Verified

Q4. Describe the steps involved in the isolation and screening of industrially important micro-organisms.
Answer: (1) Collection — samples are taken from likely sources (soil, water, compost, spoiled food) where the desired activity is expected. (2) Isolation — the sample is diluted and plated so that individual colonies can be picked. (3) Primary screening (detection) — highly selective procedures pick out the organisms of interest from the large population: the crowded plate technique (colonies producing antibiotics inhibit their neighbours), the auxanographic technique (growth on a plate lacking a nutrient, supplemented in one region), the enrichment culture technique (a medium that only the desired organism can grow on), and the indicator dye technique (a dye that changes colour around colonies producing organic acids). (4) Secondary screening — promising isolates are tested quantitatively (shake-flask and small fermenter trials) for yield, growth rate, stability and product quality. (5) Strain improvement and preservation — the best strain is improved by mutation/selection or genetic methods and stored (lyophilization, cryopreservation, culture collections such as ATCC) for industrial use.
Reference: VU handout, Lectures 3–4 — Isolation and screening.
Status: Verified

Q5. What is upstream processing in fermentation? Describe its main steps.
Answer: Upstream processing is everything that happens before the fermentation proper: the design of the reaction, cell selection, media preparation, sterilization and inoculum development, and scale-up to production. Steps: (1) Strain selection and improvement — choose and improve the production organism; (2) Media design — formulate a medium with the right carbon and nitrogen sources, minerals, vitamins and growth factors, and (if needed) antifoam; (3) Media sterilization — batch or continuous heat sterilization (or filtration for heat-labile components) to a target Del factor; (4) Inoculum development — build up the culture through shake flasks and seed fermenters so a large, active inoculum (typically 5–10% v/v) is ready; (5) Fermenter preparation — in-situ sterilization of the vessel, calibration of pH, dissolved-oxygen and temperature probes, and charging with sterile medium; and (6) Inoculation and start-up — transfer the seed aseptically and set the operating conditions (temperature, pH, aeration, agitation). Good upstream work decides the success of the whole process; downstream processing (harvesting and purification) follows after fermentation.
Reference: VU handout, Lectures 6–9 — Upstream processing; media design and sterilization.
Status: Verified

4. Finalterm Subjective

Q1. Describe in detail aeration and the agitator in a fermenter.
Answer: Aeration supplies oxygen to an aerobic culture. Sterile compressed air is delivered through a sparger (a ring sparger with holes, or a sintered sparger) placed below the impeller; the impeller shears the air into fine bubbles, increasing the gas–liquid interfacial area. The rate of oxygen transfer is described by the volumetric mass-transfer coefficient KLa; it depends on bubble size, gas hold-up, agitation intensity, medium viscosity and temperature. Oxygen is sparingly soluble, so aerobic fermentations need a continuous air supply; too little air limits growth and product formation, while too much causes foaming and stripping of volatiles. Agitator: the impeller on the central shaft mixes the broth, disperses the gas, keeps cells and solids suspended, and promotes heat transfer. Common types: the Rushton (disc) turbine — excellent for gas dispersion but high shear; and modern hydrofoil impellers — the Lightnin A315, Prochem Maxflo and SCABA — which give strong bulk mixing at lower shear. Four baffles on the wall break the vortex and improve mixing. The agitator must balance mixing and oxygen transfer against shear damage: mycelial and animal cells are shear-sensitive, so impeller type and tip speed are chosen to give adequate KLa without damaging the organism. Agitator power, air flow rate and KLa are the key scale-up parameters.
Reference: VU handout, Lectures 29–31 — Aeration and agitation.
Status: Verified

Q2. Describe the steps of purification of fermentation products in a flow sheet.
Answer: A typical downstream purification flow sheet is: (1) Harvesting / cell separation — remove the biomass by filtration (rotary vacuum filter, membrane filtration) or centrifugation; for intracellular products the cells are first disrupted (bead mill, homogenizer, sonication). (2) Cell disruption (if intracellular) and removal of cell debris by centrifugation/filtration. (3) Concentration — the clarified broth is concentrated by evaporation, ultrafiltration or precipitation (e.g. ammonium sulphate, solvent precipitation). (4) Primary extraction — the product is extracted from the aqueous phase, e.g. by liquid–liquid (solvent) extraction or adsorption on resins/activated carbon. (5) Purification — chromatography (ion-exchange, gel-filtration, affinity, hydrophobic interaction) and/or crystallization remove remaining impurities. (6) Polishing and formulation — final filtration, drying (spray drying, freeze drying), and formulation with stabilizers; quality control checks purity, activity and sterility. The exact sequence depends on whether the product is extracellular or intracellular, its stability (e.g. heat sensitivity, Maillard browning on heating) and the required purity — a bulk industrial product needs few steps, a pharmaceutical protein needs many.
Reference: VU handout, Lectures 35–37 — Downstream processing; purification flow sheet.
Status: Verified

Q3. Differentiate auxotrophy and prototrophy.
Answer: A prototroph is a wild-type micro-organism that can synthesize all the metabolites it needs (amino acids, vitamins, nucleotides) from a minimal medium containing only a carbon source, a nitrogen source and minerals — it is nutritionally self-sufficient. An auxotroph is a mutant that has lost the ability to synthesize one or more essential metabolites because of a defect in a biosynthetic pathway, and therefore requires that growth factor to be supplied in the medium (e.g. a leucine auxotroph needs leucine). Auxotrophs are obtained by mutation and detected by the auxanographic technique (growth only where the missing nutrient is supplied), and they are valuable in industry: e.g. auxotrophic mutants are used to over-produce amino acids, because the regulatory feedback is by-passed (a classic example is lysine production by a homoserine auxotroph of Corynebacterium glutamicum).
Reference: VU handout, Lecture 33 — Auxotrophy and prototrophy.
Status: Verified

Q4. Enlist five steps to control pH in a fermentation broth.
Answer: pH must be held near the organism's optimum, because growth and product formation fall off sharply outside it. Five control measures: (1) Buffers in the medium — phosphate, citrate or carbonate buffers resist pH change, and calcium carbonate is often added as a slow-release neutralizer of acids. (2) Automatic addition of acid or alkali — a pH electrode in the fermenter drives a controller that doses acid (e.g. HCl, H₂SO₄) or alkali (e.g. NaOH, NH₄OH) as needed. (3) Continuous pH monitoring — sterilizable pH probes with feedback control record and hold the set point. (4) Controlling the substrate feed rate — in fed-batch culture, feeding sugar slowly prevents overflow metabolism and the accumulation of organic acids that would lower the pH. (5) Choice of nitrogen source — using ammonium salts tends to acidify the broth as NH₄⁺ is taken up, while nitrate or urea have the opposite effect, so the nitrogen source is chosen to balance pH; aeration rate also affects pH by stripping CO₂. (In addition, the medium's initial pH is set before sterilization.)
Reference: VU handout, Lecture 34 — pH control in fermentation.
Status: Verified

Q5. What are the types of media sterilization?
Answer: (1) Batch sterilization — the medium is heated in the fermenter (or a separate vessel) to ~121 °C and held for 15–30 minutes, then cooled; simple and common at small scale, but heating and cooling are slow and heat-labile nutrients are damaged. (2) Continuous sterilization (HTST) — the medium is pumped through a heat exchanger, heated rapidly to a high temperature (e.g. 140 °C for seconds), held in a coil for the required time, then cooled; it gives the required Del factor with less nutrient damage and is the standard at large scale. (3) Filter (membrane) sterilization — heat-labile components (vitamins, antibiotics, some sugars) are sterilized by passing them through a 0.22 µm membrane filter that removes micro-organisms, without heat. (4) Chemical sterilization — occasionally used for small volumes or equipment (e.g. ethylene oxide, formaldehyde), but not for bulk media. The choice depends on the medium's heat sensitivity, the scale, and the required sterility (Del factor).
Reference: VU handout, Lecture 8 — Media sterilization.
Status: Verified

Frequently asked questions

Is the Midterm from Lectures 1-22?

Yes — Midterm covers Lectures 1-22 and Finalterm covers Lectures 23-45.

Does the quiz work from this post?

Yes — use the 'Take the BT735 quiz' link above; the quiz is already live for this course.

Are the answers verified?

Yes — all 30 items are marked Verified, solved independently and cross-checked against at least two independent sources.

More Solved Papers

See the Solved MCQs page and the midterm and finalterm mega hubs for solved papers for every subject.

🎁

Download This Study Material

Direct Link • Free • Verified Safe File

Download File

Comments

Advertisement
Advertisement

Tool